BATERÍA DE MANO GRABADA

$250.00

Mae Accesorios – Batería de Mano Grabada

Clear

Warranty: 45 Days

SKU: N/A Category:
Description

Description

INSTRUCTIONS

  • - Attach the magnetic washer provided with Mae battery to any standard cartridge. Drop cartridge into the battery cartridge hole and start vaping
  • - All Mae cartridges come with a magnetic washer. To use, unscrew the washer and remove the red rubber stopper. Re-attach washer and insert cartridge into battery.
  • - When the LED light turns red, the battery is at 20%
  • - When the LED light is blinking red, the battery is at 10%
  • - Charge battery with the Mini-USB wire included. Mae batteries are compatible with all Mini-USB’s
  • - In case of malfunction , make sure the washer is not loose . If loose , tighten it.
Especificaciones Técnicas
  • Battery, USB Charging Cable and 2 Metallic Magnetic rings for 510 Cartridges
  • • SIZE: 54.5mm*42 mm
  • • WEIGHT: 107g
  • • CAPACITY: 650mah
  • • RESISTANCE: /
  • • AIRFLOW: /
  • • WORKING VOLTAGE: 3.6±0.2V
  • • COLOR: Rose Gold | Gold | Silver
  • • POWER TYPE: Magnetic suction contact
  • • MATERIAL OF SHELL: Brass + Plating
  • • MATERIAL OF CHIP: Grade A Chip
  • • BATTERY BASE MATERIAL: Zinc Alloy
  • • LED COLOR: Blue Light
  • • LEAD TIME: 30 Days
  • • System Keeps in Standby Mode while it is not in work
  • • When smoking, the LED lights gradually light up and produce smoke; After inhaling for 2 seconds, the LED light goes out, the output continues, and the smoking is stopped within 10 seconds
  • • If you smoke for more than 10 seconds, the output is turned off, the current battery light flashes 2 times, it means smoke overtime.
  • • The red and blue double lights will enter the dormant state after flashing "blue, red, blue and red", the quiescent current is <10uA
  • • After plugging in the MICRO USB connector, the red light flashes and enters the charging state; when the battery is charged to 4.2V±0.1V, the blue light keeps flashing, indicating that the charging is complete
  • • When smoking, if there is a short circuit at the output terminal, the red light will stay on for 2 seconds to indicate that there is a short circuit at the output. In this state, there is no output at the output terminal and start automatic protection
  • • Appearance Test: The surface of the battery is not damaged and the surface is flat, No chromatic aberration, water wave, No image noise in electroplating
  • • The output voltage and current of the power supply should be consistent with the input voltage and current of the charger.
  • • The LED light is on when smoking, and the smoke of the cartridge is normal.
  • • According to the battery continuous working time standard in the product specification, the smoking time reaches the longest continuous working time of the battery in the working state, the LED is off, and the output is turned off.
  • • When the battery voltage is charged to the rated value, the internal charging is automatically disconnected to prevent overcharging.